in ,

How to install Windows 10 version? How to Install in Minutes? (Step By Step) Video

install Windows 10
Windows 10 without any problems.Now that we have given the system requirements, let's move on to explain how to install Windows 10.

How to install Windows 10 in minutes? What do you need to know for download and installation, what to do after formatting? We explain how to install Windows 10 in its simplest form.

If you want to be one of those who switched to Windows 10, or if you have already switched but need to reformat, you are in the right place. We have gathered everything you need to know for Windows 10 formatting in this article from A to Z. Let us warn you before you start: Do not see that the steps seem too much, once you start work, it feels like a sock rip off. If you wish, let’s get started. 

Windows 10 system requirements:

  • Processor: At least 1 GHz frequency speed
  • Memory: 1 GB for 32-bit, 2 GB for 64-bit
  • Storage space: 16 GB for 32-bit, 20 GB for 64-bit
  • Video card: At least DirectX 9.0 support
  • Screen resolution: At least 800 x 600

Any computer that can run today’s programs and games can also run Windows 10 without any problems.

Latest Windows Post: Best Live Stream Software for WINDOWS PC?

Now that we have given the system requirements, let’s move on to explain how to install Windows 10.

How to install Windows 10? Step by Step

  • Step#1: Go to the Windows 10 download page,
  • Step#2: Click on the button  “Download tool now”,
  • Step#3: Open the downloaded “Media Creation Tool” file,
  • Step#4: Accept the user agreement,
  • Step#5: Check “Install media for another computer” and proceed,
  • Step#6: Make your choice of language and architecture,
  • Step#7: Check “USB flash drive” as the media to use,
  • Step#8: Select the memory you will use as the Format USB stick.
  • Step#9: Enter the BIOS interface,
  • Step#10: Enter the “Boot” menu,
  • Step#11: Select the USB drive by clicking on “Boot Option # 1”,
  • Step#12: Go to the “Save & Exit” menu,
  • Step#13: Click on “Save Changes and Reset”.
  • Step#14: Adjust your language settings for Windows 10,
  • Step#15: Enter your product key,
  • Step#16: If the disk where you will install Windows 10 is divided into more than one partition, delete all the listed partitions for that disk,
  • Step#17: Click on the disk where you want to install Windows 10,
  • Step#18: Click the “Next” button.

Windows 10 clean install process

After the preparation, the clean install process of Windows 10 is a straightforward process.

435e60ef469fe2bac35883c9a93c9d56

To do a clean installation of Windows 10, use these steps:

  1. Start the device with Windows 10 USB media.
  2. On prompt, press any key to boot from the device.
  3. On the “Windows Setup,” click the Next button.
  4. Click the Install now button.
  5. Type the product key if this is your first time installing Windows 10. If you’re reinstalling the OS, click the I don’t have a product key option to continue.
  6. Click the Next button.
  7. Select the edition of Windows 10 (If applicable). This selection must match the edition your product key activates.
  8. Click the Next button.
  9. Select the I accept the license terms option to continue.
  10. Click the Next button.
  11. Click on the Custom: Install Windows only (Advanced) option to continue with a clean installation.
  12. Select the partition with the current installation (usually “Drive 0”), and click the Delete button.
  13. Click the Yes button.
  14. Select the empty drive (Drive 0 Unallocated Space).
  15. Click the Next button.

Once you complete the steps, the setup will install Windows 10 on the computer.

Latest Windows Post: Windows 10 Installation

How to install windows 10 on mac

How to install Windows 10 on Mac. Use Boot Camp Assistant to create a Windows partition. Open Boot Camp Assistant, which is in the Utilities folder of your Applications folder. Format the Windows (BOOTCAMP) partition. Install Windows. Use the Boot Camp installer in Windows.

Can you put Windows 10 on a MacBook?

[epcl_box type=”success”]With Boot Camp, you can install Microsoft Windows 10 on your Mac, then switch between macOS and Windows when restarting your Mac.[/epcl_box]

How to install windows 10 step by step

Step#1: Go to the Windows 10 download page:

Windows 10 Install
Windows 10 Install

The media creation tool you will download can only install Windows 10 on the computer you are using. However, with the same tool, you can also create a USB flash drive that you can use to format countless times. Since USB flash memory is both more practical and more useful, we will do our explanation by preparing a USB memory.

Step#2: Click on the button labeled “Download tool now”:

Windows 10 Download WALLPAPER
Windows 10

To download the Windows 10 media creation tool, all you have to do is click the download button on the Windows 10 download page. Then we will install the vehicle.

Step#3: Open the downloaded “Media Creation Tool” file

Windows 10 Open Naturo Wallpaper
Windows 10 Open Naturo Wallpaper

After downloading the media creation tool, you can open it by clicking the file from the downloads section of your internet browser.

Step#4: Accept the user agreement

Windows Phone User Wallpaper
Windows Phone User Wallpaper

As soon as you open the tool, a user agreement will appear. It is essential to read and approve this user agreement to continue using the tool.

Step#5: Check “Install media for another computer” and proceed

Windows 10 Proced Wallpaper
Windows 10 Proced Wallpaper

Even if you are going to format the computer you are currently using, you need to check the “installation media for another computer” option. The tool understands that you want to download a Windows 10 installation file that you can format on any computer with this option.

Step#6: Make your choice of language and architecture

Windows 10 Wallpaper
Windows 10 Wallpaper

The language and architecture option you make in this step is very important. Because Windows 10 that you download to a USB memory will have these language and architecture settings on every computer you install. So be sure to make the right choice, especially between 32-bit and 64-bit architectures.

Step#7: Check “USB flash drive” as the media to use

Windows Wallpaper 1
Windows Wallpaper 1

At this stage, we say that we will load the media creation tool via a USB memory. It processes the downloaded Windows 10 file accordingly and prepares it so that it can be installed directly on the computer from a USB memory.

Step#8: Select the memory you will use as the Format USB stick.

Windows 10 Setup 8
Windows 10 Setup 8

Now we need to choose the USB memory that we will process the Windows 10 installation file, that is, we will use to format it. If you have more than one USB stick installed in the computer and you are not sure which one you want to install Windows 10 on, you can remove the other USB sticks installed in your computer.

Step#9: Enter the BIOS interface

Windows 10 BIOS
Windows 10 BIOS

To enter the BIOS interface, you have to press the key to enter the BIOS while the computer is starting. Since the key used to enter the BIOS varies from motherboard to motherboard, you must find the correct key for the motherboard you are using. However, no matter what motherboard it is, you can usually enter the BIOS with the F1, F2, F10, Delete or ESC keys.

Latest Windows Post: How to Restore Deleted or Lost Files in Windows (HDD, USB Disk, SD Card)

In the BIOS settings, we will specify from which component it should read the first information it reads when our computer is booted. First, if it reads a storage unit that already has an operating system installed, we cannot initiate the formatting process. Instead, we will start the Windows 10 formatting process by enabling it to read the first information from the USB memory we created for formatting.

Step#10: Enter the “Boot” menu

Windows 10 BIOS Boot Menu
Windows 10 BIOS Boot Menu

After opening the BIOS, you need to navigate through the menus on the top and come to the “Boot” menu. The Boot menu is an area where the actions to be taken when the computer is started. In this area, we will indicate that it should read the USB memory while booting to the computer.

Step#11: Select the USB drive by clicking on “Boot Option # 1”

Windows 10 BIOS Boot Menu BIOS Option
Windows 10 BIOS Boot Menu BIOS Option

The “Boot Option # 1” option determines the component that the computer will read first. This option probably contains the HDD on which your operating system is installed. Instead, you should choose the formatting memory that is installed in the computer.

Step#12: Go to the “Save & Exit” menu

Windows 10 BIOS Boot Menu Save-Exit
Windows 10 BIOS Boot Menu Save-Exit

That’s all we need to do in BIOS. Finally, to exit the BIOS interface, navigate to the “Save & Exit” tab by navigating through the menus on the top.

Step#13: Click on “Save Changes and Reset”.

You will see two options in the “Save & Exit” menu. The option you should choose is “Save Changes and Reset”. In this way, the settings you have made will be saved and the next time the computer is turned on, it will act according to the settings you have made here. As soon as you exit the BIOS, the computer will reboot, so you will see the Windows 10 formatting interface.

Step#14: Adjust your language settings for Windows 10

Windows 10 Install Windows Setup
Windows 10 Install Windows Setup

When the formatting interface first appears, you will be greeted with a page where you need to set your language, time zone and keyboard settings. Don’t skip your keyboard layout while setting your language and time zone.

Step#15: Enter your product key

Windows 10 Setup Product Key Activate Windows
Windows 10 Setup Product Key Activate Windows

If you do not already have a Windows 10 product key, you can make the purchase from the Windows 10 purchase page on Microsoft’s official site.

Windows 10 Product Key Buy
Windows 10 Product Key Buy

On the Internet, you can find sites that are sold for much lower prices than Microsoft’s official site.

Step#16: If the disk where you will install Windows 10 is divided into more than one partition, delete all the listed partitions for that disk.

you will install Windows 10
you will install Windows 10

The storage where you install Windows is usually divided into multiple partitions. The reason for this is that the operating system needs differently created partitions in the same storage unit in order to work in harmony. To make a clean installation for Windows 10, delete these partitions one by one.

Step#17: Click on the disk where you want to install Windows 10

The disk you want to install Windows 10 on
The disk you want to install Windows 10 on

After deleting all previously reserved partitions for Windows, press once on the storage where you want to install the new Windows 10.

Step#18: Click the “Next” button.

After selecting the storage device you want to format, click the “Next” button at the bottom right.

Things to do after the format is finished:

  • Make the customization settings through the wizard,
  • Check for Windows 10 updates,
  • Install your hardware drivers.

Windows Sing in

When Windows 10 is run for the first time after format, a setup wizard will open. Through this wizard, you will be presented with settings that you can personalize your Windows experience. You will be able to choose the keyboard layout, your email address that you will associate with Windows 10, the internet network you want to connect to, and more through this wizard. The wizard is good at guiding the user, so we are not writing all the steps.

If you want a safe Windows experience, the first thing you should do after the format is finished is to check for Windows updates. These updates include critical security updates, as well as those that install important features on your computer. So be the first thing to do before you install anything on the computer, complete the updates first.

How to install windows 10 on chromebook

  1. Open a browser on your Windows computer.
  2. Go to Microsoft’s website to download the software for your Chromebook Windows 10 installation.
  3. Insert the USB flash drive.
  4. Open the file you downloaded and hit Accept.

In this video i will show you how to install Windows 10 on chromebook replacing the Chrome OS. Thanks to microcenter for support this build.

How to install windows 10 step by step with pictures

Go through the setup process normally until you see the “Which type of installation do you want?” screen. Select the “Custom” option to ensure you’re performing a clean install and not an upgrade install. Partition your system drive however you like. With Pictures Step By Step WikiHow [epcl_button label=”Go WikiHow” url=”https://www.wikihow.com/Install-Windows-10″ type=”gradient” color=”green” size=”extra-small” icon=”fa-external-link” target=”_blank” rel=”nofollow”][/epcl_button]

How to install windows 10 for free

  1. Click on the Windows 10 download page link here.
  2. Click ‘Download Tool now’ – this downloads the Windows 10 Media Creation Tool.
  3. When finished, open the download and accept the license terms.
  4. Choose: ‘Upgrade this PC now’ then click ‘Next’

How to install Windows 10 for free you your new PC step by step guide. Everything you need to know. This guide will show you how to download Windows 10 and create the USB installation media. It also shows you how to boot the Windows 10 USB using you boot menu or BIOS, how to update your drivers and information regarding Windows 10 activation. [epcl_button label=”Go Windows 10 Download” url=”https://www.microsoft.com/en-au/software-download/windows10″ type=”gradient” color=”green” size=”extra-small” icon=”fa-external-link” target=”_blank” rel=”nofollow”][/epcl_button]

How to install windows 10 from windows 7

  • Back up all of your important documents, apps, and data.
  • Head over to Microsoft’s Windows 10 download site.
  • In the Create Windows 10 installation media section, select “Download tool now,” and run the app.
  • When prompted, choose “Upgrade this PC now.”

Can I install Windows 10 on a Windows 7 computer?

The good news is that you can still upgrade to Windows 10 on a device that has a license for Windows 7 or Windows 8.1. You’ll need to download the installation files and run the Setup program from within Windows or use the Upgrade Assistant available from Microsoft‘s accessibility page.

How do I remove Windows 7 and install Windows 10?

To do this, open up the Start menu and select ‘Settings‘, then ‘Update & security’. From there, select ‘Recovery’ and you’ll see either ‘Go back to Windows 7‘ or ‘Go back to Windows 8.1‘, depending on your previous operating system. Click the ‘Get started‘ button and the process will begin.

Support for Windows 7 is now officially over, which means Microsoft wants any holdouts to upgrade to Windows 10.

The idea is that Windows 10 will help keep your devices running securely and smoothly. If you have an older PC or laptop running Windows 7, you have two options.

Latest Windows Post: How to factory reset windows 10

The first is to purchase the Windows 10 Home edition, which costs $139 on Microsoft’s website. The second way is to use the free upgrade offer from Microsoft.

Technically the offer ended in 2016, but at the time this video was posted, it still worked. I take you step by step through the upgrade process and show you how we handled a few frustrating moments we encountered on the way.

Windows 10 is still free to download. Here’s how to get the upgrade now [epcl_button label=”Go Cnet” url=”https://www.cnet.com/how-to/how-to-download-windows-10-for-free-now-that-windows-7-is-dead/” type=”gradient” color=”green” size=”extra-small” icon=”fa-external-link” target=”_blank” rel=”nofollow”][/epcl_button]

How to install windows 10 from dvd

One way is to use a USB memory stick with the Windows 10 setup, a DVD, or an ISO file with the installation.

How do I install Windows 10 from a DVD on my computer?

Boot your computer or virtual machine using the installation DVD, USB flash drive, or the ISO file with the Windows 10 setup files. In a couple of seconds, you see a quick message on the screen stating that you need to press any key to continue.

How to install windows 10 in laptop

You’ll need to reinstall the edition of Windows that matches your license. A clean installation is an advanced option to help you start fresh on your device.

Here I walk you through the process of installing Windows 10 onto your Dell Computer. However, this video applies to any brand computer. 

Latest Windows Post: How to screenshot on windows laptop?

How much does it cost to install Windows 10 on a laptop?

If you’ve got an outdated version of Windows (anything older than 7) or build your own PCs, Microsoft‘s latest release will cost $119. That’s for Windows 10 Home, and the Pro tier will be priced higher at $199.

Install Windows to the new PC

Turn on the PC and press the key that opens the boot-device selection menu for the computer, such as the Esc/F10/F12 keys. Select the option that boots the PC from the USB flash drive. Windows Setup starts. Follow the instructions to install Windows.

Report

Written by RockedBuzz

Leave a Reply

Your email address will not be published. Required fields are marked *

How To Make Pancakes

How To Make Pancakes – Easy Best Pancakes

Phone Screen to Computer

How to Phone Screen to Computer 2020