Check your internet speed in under 30 seconds. The speed test usually transfers less than 40 MB of data, but may transfer more data on fast connections.

Check Download Speed

What is Internet Speed ​​Test?

The internet speed test tests how fast your current connection is and shows you the speed you are currently getting.

The most important point here is that the speed you have measured and the internet package speed that your internet service provider has presented to you and you have accepted is in parallel.

Internet speed test shows you your ping, upload and download speed. All internet service providers make a commitment on download speed. The speed promised to you as a result of your test and the download speed seen in the test should not differ.

How Does the Internet Speed ​​Test Work?

When you start the speed test, your location is determined and the closest server to your location is determined. Once the server closest to your location is detected, a simple ping is sent to this server and the server responds to this signal. The speed test measures the roundtrip and return time of this signal in milliseconds.

After the signal transmission is completed, the download test begins. During the internet speed test, multiple connections are established with the server and small pieces of data are tried to be downloaded through these connections. At this point, it is examined how long the computer takes to obtain the data and how much data is used while obtaining this data.

To start the Hz test, all you have to do is; After entering the Millenicom Speed ​​Test page, it is to press the button that says GO. After clicking this button, the information you have requested will be sent to you under the headings Download, Upload and Ping.

Things to Consider Before Speed ​​Test

In order to test your speed and get the most accurate result, the following steps should be considered before the test. After following these steps, you can start the internet speed test.

  1. Turn the modem off and on: Because your modem works uninterrupted for a long time, its processor and RAM are tired. Before measuring internet speed, first turn off your modem, wait 10 seconds and then restart it. In this way, the modem works with full performance and your internet speed is measured precisely and accurately.
  2. Close any programs with high data exchange: Download programs and torrent applications running on your computer may negatively affect the internet speed test. For this reason, it is recommended that these programs be closed before the speed test.
  3. Close or disable all open pages and applications except the speed test page: While you are doing an internet speed test, there may be applications running in the background on your computer or device, which may prevent you from getting accurate results using your internet connection. For this reason, all open applications and pages except the speed page must be closed before performing a speed test.
  4. Make sure that only the device you are testing is connected to your modem : You may see different results when different devices are connected to the modem. Even if you are not accessing the internet from other devices, many applications running in the background may be using and slowing your internet speed. For this reason, make sure that other devices from the same network, such as mobile phones, tablets, are not using the internet connection.
  5. Make sure that the distance between your modem and the device you are using is not too far : Since the modem and the device are too far from each other, the signals may get mixed up. In order to get the most accurate result, there should be a small distance between the device you want to measure the internet connection and the modem.

What do the results of the Internet Speed ​​Test mean?

When you perform the speed test, you will see various numbers under the Download, Upload and Ping headings. You can find details on what these headings mean below.

  1. Download Speed: Download speed (download speed) measured in Mega Bit Per Second (Mbps) is the most important value to be considered in cases where internet speed is considered to be low. This is the speed that internet service providers promise to sell to their customers. For this reason, there should be a parallelism between the download speed measured when the speed test is performed and the speed promised by the internet service provider in the first place.

    Download Speed, which is the most important indicator when determining the speed of a line, shows how fast the device can receive data from the internet and they are at much higher speeds than upload.

    Download speed (Download) is used to mean downloading data from the internet. When you type the address of a website on the Internet into the address line of your browser and press enter, your browser starts to download all the texts, pictures and sounds, if any, on your computer, that is, it “downloads”. Internet download speed is effective for many activities such as surfing the internet and watching online videos. The higher your download speed, the better your internet speed.

    When we look at today’s internet usage habits and internet usage areas, internet speed between 16-35 Mbps can be considered as ideal. However, speeds below or above are also preferable speeds according to internet usage habits.

  2. Upload Speed: The upload speed is the value showing the data rate sent to the servers. This means the duration of viewing data you send. It also determines your file upload speed. Upload speed has lower values ​​than download speed. The upload speed must be sufficient to properly perform activities such as video calling, online game playing and uploading large files.

    Nowadays, actions such as playing online and uploading videos to the internet have become quite common. Accordingly, it has become important to reach high upload values.

  3. Ping: Ping; It is the abbreviation of the text “Packet Internet -Network Groper”. We can translate the word Ping into Turkish as “Internet Package or Inter-Network Probe”.

    Ping can be defined as the reaction time on links. It measures the time it takes your existing data to travel to and from another server. Ping time starts to increase when you try to connect to data abroad. We can give an example of a bullet to explain this issue. When you shoot at a close wall, it will take a short time for the bullet to bounce off the squeezed surface and return. However, when you shoot at a wall farther from where you are, it will take longer for the bullet to reach the surface where you fired and bounce from that point.

    Ping is very important for online gamers. The lower this time, the happier the connection quality in the game will make you. If the ping time is high while watching videos in applications such as Youtube, Netflix or trying to access a site from abroad, it may cause the videos to hang, complete in a longer time or freeze.

    The ideal ping time depends on what purpose you use the internet. The high ping for some users may not be a problem for other users.

    You can take a look at the performance you will get according to the ping time intervals from the table below;

    Ping Time (milliseconds)Status
    0,1 – 10Very good quality – All online games can be played easily. You can watch videos comfortably.
    10 – 30Quality – All online games can be played easily. You can watch videos comfortably.
    30 – 40Ideal – All online games can be played easily. You can watch videos comfortably.
    40 – 60Average – If the server is not busy, online games can be played. You can watch videos comfortably.
    60 – 80Mediocre – Online gaming can be played if the server is not busy. You can watch videos comfortably.
    80 – 100Bad – No online games are played. You may experience freezes while watching videos.
    + 100Too Bad – No online games are played and videos are hard to watch. Commands are transmitted to the server late.

    With ping times of 0 – 40 ms in online games, you will not have too much trouble and have a nice gaming experience. In ping times of 40 ms and above, your gaming experience may be limited. The ping interval of 40 – 80 ms will be sufficient for you if you do not play the online game much and use the internet for watching videos and standard operations. However, it is possible to experience breaks and freezes while playing online games or watching videos at ping times of 80 ms and above.

What is Mbps?

Mbps, which stands for Mega Bits Per Second, is the number of data transferred per second in megabits. It is the standard speed unit of the Internet. It shows us how many mbps data is transferred within 1 second. Megabit is also abbreviated as “Mb”.

Internet speed and download speed concepts are often confused, albeit different from each other. Internet speed, as mentioned above, is usually expressed as Mbps, while download speed is expressed in KB / s and MB / s.

Below, you can find information about how large files you can download per second according to internet speeds. However, when the distance to the power plant, infrastructure and server speeds are taken into account, the theoretical values ​​may also decrease significantly.

Internet speedDownload Speed
1 Mbps128 KB/s
2 Mbps256 KB/s
4 Mbps512 KB/s
8 Mbps1 MB / s
16 Mbps2 MB / s
32 Mbps4 MB / s

How Many Mbps Should Be Ideal Internet Speed?

The vast majority of our home internet usage consists of videos, TV series, movies we watch online, songs we listen to and games we play. People’s internet needs and internet traffic have also increased, especially thanks to the online series and movie viewing platforms that have become widespread in recent times and their use has increased.

When deciding on your ideal internet speed, the following two main factors should be considered;

  1. The number of people using the internet in your home,
  2. The average internet usage and download amount of the people who will use the internet.

In addition to watching videos and movies, if you regularly download large downloads over the internet, your internet speed usually affects your download speed. It takes about 4 hours to download a 10GB game from Steam at 5 Mbps, and 15 minutes on a 100 Mbps internet connection.

In general, you can browse the web at a connection speed of 8 Mbps and do most of your daily internet work like sending mail. High Internet speed is not required for such jobs. However, if you are broadcasting with video, downloading large files, talking on video and watching videos over the internet, you need a faster internet package.

Today, internet packages with speeds between 16 Mbps and 50 Mbps seem ideal.

Packet Loss Nedir?

Packet loss occurs when your network connection loses information while it is being transferred. This can slow down your network connection and reduce the reliability of network communications with devices. Stopping packet loss should be the first action to take for anyone who wants to fix a problematic network.

In network traffic, information is sent as a series of separate units called packets rather than being transmitted as a continuous stream over the network. These units can be compared to separate pages in a book. Only when in the right order and together they make sense and create a consistent look. When your network connection loses pages, ie packets, the entire book, ie network traffic, cannot be generated. Packages may be missing, damaged or otherwise defective as well as being lost.

Packet loss can have multiple causes. Below you can find the reasons that may cause the package loss and the details of the actions to be taken against these reasons;

  1. Software bugs: No software is flawless. Your network hardware or software may have bugs that cause packet loss. In this case, there is little the user can do. If you are having such a problem, the easiest way to solve the problem is to consult the hardware supplier and install the firmware that may come from them on the computer. You should make sure you report any suspicious errors you find to the vendor providing the hardware.
  2. Damaged cables: Packet loss can also occur due to damaged cables. Packet loss will occur if your Ethernet cables are damaged, improperly wired, or are too slow to handle network traffic. To fix this problem, you can either refresh your cable or check your cable connection again.
  3. Insufficient hardware: Any hardware forwarding packets in your network can cause packet loss. Routers, switches, firewalls, and other hardware devices are the most vulnerable. If they can’t “keep up” with the traffic you’re forwarding, they’ll drop the packets. Think of it as a waiter with full arms: if you ask them to take another plate, they’ll probably drop one or more plates.
  4. Network bandwidth and congestion: One of the major causes of packet loss is insufficient network bandwidth for the requested connection. This happens when too many devices try to communicate on the same network. In this case, it is recommended to communicate with fewer devices on the same network.

Why Your Internet Speed ​​May Be Slow

Internet speed may vary from time to time and your internet may slow down. These fluctuations can have many different causes. We can list these reasons as follows;

  1. Different Connection types: Your internet connection may vary depending on the type of connection you use. Among the dial-up connection, dsl or cable internet options, the fastest connection will be cable internet. Among these types of connection, if the Fiber Optic service produced as an alternative to the copper cabling method is used, the internet speed will be higher than the others.
  2. Infrastructure problem: Infrastructure problems can also cause your internet speed to slow down. There may be a malfunction in the cables coming to your location and this problem is usually noticed by the internet service providers and the necessary corrections are made without you noticing. In such cases, internet service provider customers from call centers or SMS etc. informs ways.

    If the problem is not that wide, it can only be noticed later in your apartment, if there is a problem in the connections to your home. In these cases, a fault record is taken and the teams in charge of the technical unit examine the problem in detail later and solve it.

  3. Location of Your Modem: The location of the modem in your home or workplace is one of the factors affecting the internet speed. The distance between the device you connect to the internet and the modem you are using, the number of walls, the thickness of the wall may cause your internet speed to decrease or your internet connection to drop. In such cases, you can buy a router (router, wifi extender) in addition to your wireless modem and place this router closer to the device you connect to the internet, and in this way, you can solve the problem with your internet speed.
  4. Number of Wireless Networks in Your Area: It is very important how many wireless networks are available in your building or on the street. If you live in an environment with hundreds of wireless networks, you may not be able to take full advantage of your connection.
  5. Computer problems: Spyware and viruses, the amount of memory, hard disk space and condition of the computer can cause slow internet connection speed. This way, you can install a virus and spyware protection program on your computer to avoid any problems.
  6. Running many programs at the same time: Running too many programs and applications on your computer will slow your internet speed. For a fast internet experience, you should not run too many applications and programs at the same time.
  7. Website density or internet usage time: If the density of the website you want to use is high, if too many people are trying to access this site at the same time, your access to that site may be slower. In addition to this, you can observe that your internet speed is lower than normal during the hours when internet usage is very intense.

How to Speed ​​Up the Internet?

You can make your internet speed slower from time to time faster by applying the following items;

  1. Restart your modem: Occasionally, problems may occur with modems that work continuously for a long time. If you are having internet speed problems, turning your modem off and on may solve this problem. To do this, you need to turn off the device by pressing the power button on the device and turn it on again after 30 seconds. When you turn off the modem, all lights on the modem should go off. If you are not sure that you have turned off the device, unplugging the adapter cable of the device, waiting 30 seconds and then plugging it back in will do the same. After the modem is turned on and off, it may take 3 to 5 minutes for the internet connection to come back. After turning the modem on and off, you can easily monitor the return of the internet connection from the warning lights on the modem.
  2. Use a new model modem and make sure you are using a secure Wi-Fi password : Make sure your Wi-Fi password is safe. If your password has been compromised and your internet is used by people other than you, your internet speed will slow down considerably. Convert your modem to the most current model. Modems that have been used for many years can interfere with fast internet connection.
  3. Don’t have too many favorites or bookmarks in your browser: If you add too many sites to your favorites or bookmarks, they can cause your internet speed to slow down. Because each page loads when you open your browser. Clean these sites regularly.
  4. Scan for Viruses: If you have a virus on your computer, it can cause your internet speed to drop. Scan your computer for viruses and clean any existing viruses. The speed of both your computer and internet will increase.
  5. If possible, connect to the internet with Ethernet Cable instead of Wi-Fi: You can try to connect to the internet with ethernet cable instead of wireless connection to prevent any data loss during data flow. Connecting to the internet with an Ethernet cable will minimize loss of speed and provide a better connection experience.
  6. Clean up your desktop: Delete junk documents. Collect the important things in one folder. Thus, you can avoid speed problems caused by the computer.
  7. Turn off your modem when not in use: Overheating problem can cause signal problems.
  8. Update regularly: Regularly install updates for the operating system on your computer.
  9. Clean your internet history regularly: If the accumulated files in your browser (Google Chrome, Explorer, etc.) increase, this density can slow down your internet speed. Clean your browser cache regularly and restart your computer after clearing it.
  10.  Turn your DNS settings to automatic.
  11. Use Chrome, Firefox, Opera or Safari instead of Internet Explorer.
  12. Go to your computer’s control panel and remove all the useless programs you don’t use via add and remove programs.
  13. Upgrade your internet package: You can call your current internet provider to get information about upgrading to a higher package, and take advantage of a faster internet package suitable for your infrastructure.

To run the test, you’ll be connected to Measurement Lab (M-Lab) and your IP address will be shared with them and processed by them in accordance with their privacy policy. M-Lab conducts the test and publicly publishes all test results to promote internet research. Published information includes your IP address and test results, but doesn’t include any other information about you as an internet user.

Check Download Speed

Measurement Lab (M-Lab) provides the largest collection of open Internet performance data on the planet. As a consortium of research, industry, and public-interest partners, M-Lab is dedicated to providing an ecosystem for the open, verifiable measurement of global network performance.

What is a good download speed?

What is a Good Internet Speed? While most users are content with 25 Mbps download, power users and streamers should consider much higher speeds. Any internet connection above 25 Mbps is considered a good internet speed, particularly for average users with no more than three people using the connection.

Open Source

Measurement tools are openly licensed and operated, allowing third parties to develop their own client-side measurement software and audit the source.

Public Data

Data collected is made available to the public, allowing researchers and anyone else to build on a common pool of network measurement information.

Global

Distributed infrastructure and large user base provides an open, verifiable measurement platform for global network performance.

Trusted

Used by public organization, academic researchers, regulators and companies around the world to understand the health of the Internet.

M-Lab provides the largest collection of open Internet performance data on the planet. As a consortium of research, industry, and public-interest partners, M-Lab is dedicated to providing an ecosystem for the open, verifiable measurement of global network performance. Real science requires verifiable processes, and M-Lab welcomes scientific collaboration and scrutiny. This is why all of the data collected by M-Lab’s global measurement platform are made openly available, and all of the measurement tools hosted by M-Lab are open source. Anyone with time and skill can review and improve the underlying methodologies and assumptions on which M-Lab’s platform, tools, and data rely. Transparency and review are key to good science, and good science is key to good measurement.

RECENT POSTS